Building and Developing
Before you apply
It's your responsibility to make the sewer connection and before you apply for our approval you need to know what type of sewers are available to you and whether a connection is possible.
You can request a copy of our maps. Following a change in government legislation in 2011 a lot of private drains and sewer have transferred into our ownership and our maps are still being updated.
Find out more details about transferred assets.
We'll need to know if you are making a direct connection or an indirect connection. The application costs for these connections differ so you need to be aware which is required before you apply.
- A direct connection is any connection that is made to any public sewer.
- An indirect connection is a connection to a private drain that then goes into a public sewer.
This diagram shows a typical sewer layout, any connection made to the red pipe would be classed as a direct connection, any to the green would be an indirect.
There are two types of sewage, foul and surface water. Foul is any used water from the property e.g. toilets, showers, sinks, washing machines etc. Surface water is any rainwater collected from impermeable areas e.g roof, driveway, patio.
In most circumstances a property will need to be connected to take the foul sewage away. Surface water should only be connected to a sewer if ground conditions do not permit the use of a soakaway or there is no local watercourse available to drain to. If you are making a surface water connection we will need to see evidence of why soakaways cannot be used. For more information on soakaways see our FAQs.
New properties don't have to have individual sewer connections and it is quite common for them to share a sewer pipe.
If there are both foul and surface water sewers in your area we will expect you to make a separate connection to each sewer.
If we have a combined sewer (shown in red on our records) that you can connect to then you'll only need to apply for one connection.
You'll be required to gain our approval for each connection you make to the existing sewer.
Each connection has an application fee associated to it.
You need to employ a contractor to carry out the sewer connection work.
If you're making a direct connection to a public sewer, we will need you to provide their details along with their Health and Safety policy, a site specific risk assessment, and a method statement with your application so that we can ensure they are safe to work on the sewer network.
If any of the sewer connections are within public highway your contractor will need to have the relevant licence from the council.
If not, you will need to ensure you arrange this with the land owner.
Severn Trent can't give permission to you or your contractor to enter or carry out work on private land. You're responsible for arranging this.
If not, you do not need to apply yet.
Our approvals are valid for 6 months. If you don’t think you'll be making your sewer connection in that time then now isn’t the right time to apply.